62 Ambient temperatures
· The appliances are intended for refrigerating, freezing and
storing food and for making ice (if equipped accordingly).
· The appliances are designed for operation within the ambient
temperature limit values which depend on the climate class.
· The climate class describes the ambient temperature at which
the appliances may be operated in order to achieve optimal
cooling performance.
· The climate class of all refrigerators and freezers is SN-T, and
for wine cabinets SN-ST.
Climate class Ambient temperature
SN 10 °C to 32 °C
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
SN-ST 10 °C to 38 °C
SN-T 10 °C to 43 °C
IMPORTANT
Do not operate the appliances outside of the ambient temperature
ranges specified.
· The refrigerant circuits have been checked for tightness.
· The appliances meet the applicable safety regulations.
Secure mounting
In order to prevent the appliance from tipping over following
installation, the anti-tipping device must be fitted. Please note
in this regard the information in the chapter “Secure mounting”
in the installation instructions.
InfinitySpring (integrated water dispenser) and
IceMaker (depending on model)
Monolith appliances fitted with an InfinitySpring or IceMaker
must be connected to a water supply. The water pressure must
be between 2.8 and 6.2 bar.
Only the supply hose delivered with the appliance must be
used to feed water to the InfinitySpring/IceMaker.
If the degree of hardness of the water at the installation location
is high, we recommend installing a water softener. A filter
must also be used in case solids such as sand are contained in
the water.
All devices and systems used to supply the appliance with
water must meet the relevant applicable provisions in your
region.
All appliances fitted with InfinitySpring or IceMaker have a
water filter which is located in the front section of the appliance
base. The water filter must be replaced regularly. An
InfinitySwipe alarm reminds you when it is time to replace the
water filter.
Safety requirements
⸺